NO.DESCRIPTION RECOMMENDED
1
End, corner
or intermediate post
TE, Long-Life T or PRO T GALVA post
2 Strut
To be used with end posts, at corner junctions and
at tensioning points every 25 m
3 Tension wire Install 2 to 6 tension wires depending on the fence height
4 Strainers
1 per row of tension wire, at each angle post or end,
and every 25 m
5 Tension bar 1 per roll end
6 Binding wire or staples
The number or binding wires or staples depends on
the number of rows of tension wire
MESH
RANGE
WIRE
DIAMETER (mm)
RELATED TENSION
WIRE
RELATED
STRAINER
PLASTEX® premier 5024 2.4
2.4 mm, plastic coated
No. 2, plastic-coated
PLASTEX® CLASSIC 5027 2.7
2.7 mm, plastic-coated
No. 3, plastic-coated
PLASTEX® HEAVY 5044 4.4
3.5 mm, plastic-coated
No. 4, plastic-coated
GALVEX® PREMIER 5020 2
2.2 mm, Zinc Aluminium
No.2 galvanised
GALVEX CLASSIC 5022 22
22 mm Zinc Aluminium
No2 or 3 galvanised
GALVEX STRONG 5030 3
27 mm Zinc Aluminium
No3 or 4 galvanised
GALVEX HEAVY 5039 39
27 mm Zinc Aluminium
No 4 galvanised
AXIAL21 24mm plasticcoated No 2 plasticcoated
AXIAL PREMIUM 25 27mm plasticcoated No 3 plasticcoated
BASTILLE3 3mm plasticcoated No 4 plasticcoated
BASTILLE3 3mm plasticcoatedNo 4 plasticcoated
A – Embed the f irst post with 1 strut
B – Embed posts every 2 to 3 m (depending on the required rigidity).
Every 25 m, embed a post with 2 struts to
increase its resilience.
C – Embed a post with 2 struts at the corners.
TENSION WIRE
D – Fit the tension wires with the strainers.
E – Attach the roll by running a tension bar
through the sheet, and tie or staple the
binding wire between the mesh
and the tension wires.
1
2
2.5 m25 m 2.5 m 2.5 m
B
1
2
2
C
1
2
3
3
4
D
5
6
E
1
2
A
1 – T post 5 – Tension
bar
6 – Staple 4 – Strainer
2 – Strut
3 – Tension
wire
INSTALLATION ACCESSORIES
INSTALLATION PROCEDURE
100 m roll
INSTALLATION CONFIGURATION
6005
Moss green
7016
Anthracite grey
Hotdip
galvanised
Base plate for
30mm section post
6005
Moss green
Base plate for 25 mm
section strut
6005
Moss green
7016
Anthracite grey
Hotdip
galvanised
T STAKE support
to be inserted
90