Extension arms for UNIVERS post
• 2 to 4 rows (branch length
400 mm and 600 mm).
• Installation with:
– Ronce barbed wire,
– Tigre / Concertina.
Extension arms for AXOR
®
post
• 3 to 4 rows (3 rows
recommended) (branch length
500 mm and 680 mm).
• Compatible with:
– Ronce barbed wire.
Extension arms for AXIS
®
post
• 3 to 4 rows (branch length
500 mm and 680 mm).
• Installation with:
– Ronce barbed wire,
– Tigre / Concertina,
– AXIS
®
D panel,
– Supplied with the screws.
Extension arms for AXYLE
®
post
• 3 to 4 rows (branch length 500
mm and 680 mm).
• Installation with:
– Ronce barbed wire,
– Tigre / Concertina,
– AXIS
®
D panel,
– Supplied with the screws.
INSTALLATION WITH AXIS
D PANELS
Allows fence height and security to be increased
40 cm high panel
To install extension arms with AXIS
inf ill double the number of posts in the angles
INSTALLATION WITH RONCE BARBED WIRE
• 2 twisted wires with 4-pronged defensive spikes at 10 cm intervals.
• 2 versions:
– the wire (STRONGO
®
PLAZIAL hard steel barbed wire) is very resistant to breakage,
– alternating twists block the spikes and stop them from slipping (Ronce PROTECTO
®
barbed wire).
A pair of fencing pliers is required to attach the barbed wire to the extension arms using staples.
Other accessories required: spacers and caps, tension wire and strainers.
– For fence fastening bracket = 1 spacer + 2 caps + 2 single join kits
– For angles = 2 spacers + 4 caps + 2 single join kits + 1 double join kit
Ronce
barbed wire
INSTALLATION WITH TIGRE CONCERTINA
Deterrent and delaying protective blade system for highsecurity fences
The blades are designed so that they will pierce grip and cut
Manufactured from a strip studded with sharp spikes on a hard steel or stainless steel wire blade
2 conf igurations
in a wire coil for the extension arms
f lat to be installed along the fencing as a complement to the extension arms
For enhanced security
the Tigre network can also be installed on the ground
the f lat Tigre is to be installed on panels
For single extension arms install 1 row of barbed wire at the top and bottom
For double extension arms install 1 row of barbed wire at the top
A pair of fencing pliers is required to attach the barbed wire to the extension arms using staples
A tension bar must be f itted inside the spires
Coiled Tigre
Flat Tigre with bayonet
Please see the instruction manual for the unique aspects of each item of equipment
POSSIBLE CONFIGURATIONS
EQUIPMENT FOR EXTENSION ARMS
View from outside the site
View from outside the site
View from outside the site
View from inside the site
221